Showing posts with label arm. Show all posts
Showing posts with label arm. Show all posts

Tuesday, April 30, 2024

Generate cross compile toolchain in Gentoo

Gentoo crossdev

Table of Contents

1. Introcution

Crosstool-ng is commonly used to build a cross-compiler toolchain in various Linux distributions. In Gentoo, the cross-compiler environment generator, crossdev, has been made for our convinience. It is a set of bash scripts that utilize emerge to provide a system integrated cross-compilation capability.

In this article, we are going to walk through building cross-compiler toolchain for an operating system and the embedded target (bare matel).

Emerge to install crossdev.

$ sudo emerge --ask sys-devel/crossdev

Thursday, July 3, 2014

STM32F401 Disco sensor demo with Bluetooth Low Energy

1 Introduction

stm32f4-bluenrg is a sensor demo project for STM32F401 Discovery board in conjunction with a BlueNRG module.

The BlueNRG app allows you to access the sensor data directly from the mobile device over Bluetooth Low Energy.

Sunday, May 4, 2014

uGFX Notepad on STM32F429I Discovery FreeRTOS

1 Introduction

FreeRTOS 8.0.0 on 32F429IDISCOVERY board that demostrates uGFX notepad.

Tuesday, April 22, 2014

FreeRTOS 8.0.0 porting on STM32F429I Discovery Board on Linux

1 Introduction

FreeRTOS 8.0.0 porting on 32F429IDISCOVERY board using GCC on linux.

Saturday, April 12, 2014

Remotely GDB USART1 Project with STM32F429I Discovery Board

1 Introduction

In this article we are going to GDB remotely debug an USART1 project on STM32F429 Discovery board. System clock configuration and USART fractional buad rate calculation will also be introduced.

Friday, March 14, 2014

STM32F429I Discovery SMS Emulator on Linux

1 Introduction

Alessandro Rocchegiani released some interesting projects on STM32 series MCUs. This article introduces the adding support to be built and burned under Linux, with the project STM32F429 Discovery Sega Master System Emulator as an example.

Thursday, December 29, 2011

GDB Debugging ARM U-Boot on QEMU

1 Introduction


QEMU is a generic and open source machine emulator and virtualizer. In this article, we will use it as a machine emulator and run the U-Boot on top of it. It will also be demonstrated about how to debug U-Boot with GDB.